Hard rock's latest activity

I’ve been handloading for 30+ years but this I need some help with. This is near max powder but my coal is longer than book obviously...

Doesn't exactly look like classic ejector swipe. Use a punch and check to make sure the ejector can be pushed flush or slightly below...

I agree those primers are showing pressure. Or at least appear to be.

THIS^^^^^^^^^

Agree with measuring velocity. I never shoot at the bench without the Oehler 35P in place. It is an independent voice that proves...

Bingo.

Yep, that is over pressured. Start to reduce that load

Is the face of that plunger square? Looks to me like a machining tit left behind in the middle, but your pic is blurry. I have had...

Lower the charge on a couple and see if you get the same swipe. Those will tell u if it's a mechanical issue such as ejector with junk...

At this point unless you have access and knowledge on how to use pressure gage equipment , I would make sure I wasn’t jammed into the...

You may wish to consider running some sample calculations to see the practical effect of the greater BC on wind. I suspect you may find...

With that kind of grouping, I wouldn't change a thing. I don't think the animals will know the difference. I run the Berger 140 VLD and...

It’s mostly about the BC. The Nosler groups great but the BC is nothing to write home about

Correction PREFITS

You may check out the switch lug from ,WEST TEXAS ORDANCE , very simple all you need is an Allen wrench ,to torque to 30 in pounds ...