Greyfox's latest activity

I agree with others that you sample may be too small. Additionally, I have observed SD’s change with and without the use of a muzzle...

With only three shots per test, way too little data to actually come to a conclusion. Next three of each could be opposite. You...

Depending on the age and amount of use of your 458, you might also want to check/replace the magazine follower spring. My 458 Model 70...

From my experience typically using 24-26”heavy Sporter to light Palma steel barrels (4-4.75 pounds) on my LR hunters, a carbon wrapped...

Yes, I size after pulling bullets. Whether to crimp or not depends in the cartridge/rifle. Repeaters(ie levers) with heavy loads are...

Lapua is my #1 choice if they make it in the cartridge I am using. If you are getting stiff bolt lift and ejector with Lapua, you are...

LAPUA brass (and Peterson) have less internal volume than most. Thicker case walls. So an equal powder charge in say Norma or...

Decades ago, in my early days of LRH, the SFP was often leveraged for distance shooting and ranging. I used the SFP Leupold scopes with...

My psychology between my hunting rifles and my competition/Varmint rifle as different as the rifle configurations and weight. They are...

One stock, multiple actions, the closest you can come is to use a straight pillar bed setup where it touches in two places only and...

I have an MTR-1 (MOA) reticle on my March 2.5x25x52 SFP scope. Nicely weighted, un-cluttered reticle. 2MOA divisions at 20X. I have...

The first box of 142gr 6.5’s I bought shot great. I was not able to duplicate the results after trying a couple of subsequent lots...

YUP,.. I Do ! As a former Gunsmith, I've seen, the Loosening of Screws, many, MANY,. times. Degrease all threads with, Acetone / clean...

Great choice. I've been using the same scope/reticle with excellent results for several years….Perhaps one of the most effective...

I’m primarily a whitetail hunter too,except for the south east and Midwest. Although, this rifle is being built for the west. I’ve...