Get_Saum's latest activity

The 338 RUM case is what the 300 RUM should have been imo. I really like the 300 RUM case but I never loaded the heavies. 190 Berger’s...

@derickd @Elk Hunter 338 knows his stuff and I agree with him.

On my rifle, I’m running the BDL M5 with the internal box and it measures 3.220.

With .210 fb I’m at 3.049” case overall length with the Berger 180 vld. With my Lone Peak Fuzion build I’m using Hawkins medium bottom...

My 7 saum is built on a Lone Peak medium Fuzion.

I see you said that you have chosen the 300 RUM.. I build a ton of them and will tell you they will surpass a 300 prc in any barrel...

Both 6.5 saum’s. The top rifle is built on a Lone Peak Fuzion short action with a 21” Benchmark carbon. I used Unknown Munitions m5 dbm...

These 2 reamer makers are who I would recommend if you’re considering. This is good advice as well.

I had my reamer built with .210 fb. It’s about perfect for the 180 vld. If I was building it specifically for the 175 EH I’d probably...

Contact whoever the reamer manufacturer you are going with (Manson, JGS, etc) and ask for their reamer blueprint and modify from there...

Similar to Shooter264, for my 6 saum I’ve used my Redding 6.5 saum competition seater. I didn’t need do anything to the seater stem but...

A couple of 300 PRC‘s I’ve done with 22 inch barrels run about 2700 ft./s with 225 match Hornady ammo. Before that I had one at 20...

Sure but not enough to make a difference for me when it comes to punching hide. Just depends on what you’re after. One of my 300 PRC‘s...

You may have seen this, but Christensen arms has their FFT line also in either chambering. Good length for using a suppressor.

I’ve had both as well. Either are a great choice. I’ve stuck to loading the 300 prc with 215 to 230 class bullets as it was designed...