emp1953's latest activity

According to the Hornady ballistic calculator the 130gr with a BC of .416 and M/V of 3000fps shows slightly over 1800fps at 600yds...

I look at a ballistic chart for my caliber and bullet weight. Since I shoot Nosler Partitions and they recommend 1800fps for their...

For whitetails I started with 130gr partitions 51gr h4350, my guide told me I was destroying too much meat, I should go to heavier...

After I find THE node for my rifle I load up 100 or so rounds at the seating depth that touches the lands. I shoot 5 shots at that...

If you like the 7mm Rem Mag they why don't you just buy a Tikka T3x Superlite (Model TF1T27RL103MT) in 7MM Rem Mag? They are readily...

In my 30-06 165gr Partitions over 47.2 gr 3031 has been very accurate. I've shot 3 whitetails walking straight at me at 180+yds. It's...

Oh jeez, sorry. Hope he came to a solution.

I too have recovered numerous Partitions and have never once recovered one in which the front portion of the bullet wasn't a perfect...

I had a great load in .270win using 130gr partitions for whitetails. I was destroying lots of meat. My outfitter told me to go to a...

I wish the swifts were easier to get. As swifts got harder to source I switched to Partitions. Partitions perform just fine, I started...

FMJ, Partition style bullets have exposed lead at the rear because of design, the lead has to get in there somehow. I have recovered...

If you are questioning me, the original CCI200 load consisted probably of 240 rounds. The load with the Remington primers stands...

Right, as if supply challenges aren't enough to deal with. Coloring within the ATF guidelines adds to the complexity. I got lucky...

I thought I was getting an 8lb keg, but when the order arrived it was 8 individual containers, so I made the best of it.

I've always found that in the woods at 100yds or so anything over 6x was a detriment. If your scope truly goes down to 6x and tracks...