DUCKMAN11's latest activity

Mathewsboy, I run 21.5 grains of H335, giving me around 2900 F.P.S. M.V., C.O.L. is right at 2.200 the thing is the slower twist rate of...

I went with the 20 Tac and all I needed was a Redding form die. No fire forming necessary since the first round fired in a newly formed...

The main reason that steers me away from the Grendel/ARC case is the low pressure ceiling. 5.56 runs at 62k and the ARC's run at 52-55k...

I went with 6ARC. I don't have as much time as I'd like and I used a 108 ELD-M because that is what I had loaded last season. The fur...

https://bcprecisionballistics.com/, I was looking at this 6mm Max as an option. Good luck.

Mine had been good but valid point. Now you're making me think I should pick up a spare bolt.

Grendel bolts make me nervous

25 DTI, basically 6.8 spc II necked down to 25cal. Pushes 90gr gamekings close to 3000fps/sub 1/2moa. Fireforming loads shoot nearly as...

I like the 223 with a 16.5 " to a 20" slower twist barrel for running 55 grain hollow point bullets, a Wyld chambering is fine just run...

If you reload I would get something based off the 6.8 SPC case or even a 6x45. The reason I say that is I've broke 2 bolts with my...

Kill coyotes. Fur friendly is not a consideration

18”-20” Grendel, suppressed. Deal with the 7” additional length of the can and enjoy all the benefits of that setup.

6/45 or 6.5 tcu

6 ARC and 6.5 Grendel

I too, use the Barnes 80gr ttsx in 2506 at 3800fps (24" barrels w/R19) it truly is "hold on hair"out to 300yds. Just stick with 223 in...