Dmagna's latest activity

Wrong forum bud.

I am getting clickers and need to resize closer to the belt. There is no collet die for this cartridge being that it is the only...

Is it a new barrel?

I was getting 3650 with the Barnes 101 lrx, I would highly doubt weatherby is using rl26.

Is there a way to make one using a 06 based cartridge? I am getting clickers and the brass is expensive. Or is it possible to take a 240...

Well depends on what brass you want to use. Lapua 30-06 brass is in stock places, if you are going to turn necks and go through the...

I have been using rl26 in mine. 3300 fps with alpha brass and a cci450

Freebore is not jump, depending on the weight of the mono you plan to shoot you could use the freebore up pretty easy. Monos are longer...

You get what you pay for in this game. “Top Brass” is good for plinking but that’s about it. Any bulk package brass will have dents and...

I used 260 rem lapua

I believe it was around 89 grains.

I had the best case fill with n568, it was just a tad slower than n570 in a regular lapua. Really consistent as well. H1000 worked...

I had a fresh reloads at the range, opened the box got some snow flurries in there and the cases got damp. I think between the water on...

You probably are not bumping the shoulder enough. But you must have been busy, cause it’s 2024 so it’s been 2 years.

You can’t have speed without barrel wear. I would love to have a 28 Nosler that gets 2000 rounds per barrel. But it isn’t going to...