Recent content by DJ Fergus

Bump, Has anyone used the 6mm 115 target vld for hunting? Feedback please.

Have you been able to take any game with the 110 atips?

I've run the 112s as slow as 3150fps and the jackets still sling off

So I've run a new lot of the 112s in a new barrel. The slowest I've run them and still blowing up at around 3240 fps. I may keep backing down to see where they will quit blowing up.

I've had them come apart also. It was an older lot. I might give a newer lot a try in another rifle.

I contacted Winchester a couple of years ago about some bad primers I had. They didn't offer to replace them.

I had a factory 700 chambered in 7mm RM. The chamber was so far out of alignment with the bore that fired brass would wobble when it was rolled across a flat surface. It would shoot 1/2" moa with new brass but shot horrible with once fired brass

Are you guys sorting the 112s? And if so, are you sorting by bto or bearing surface length?

How did the 112s shoot for you? Did you sort them?

I need a 7 twist 5 or 6 groove. Thank you for the offer.

Has anyone shot some recently produced 6mm 112 match burners lately? They had some lot issues with blowups and tumbling a couple of years ago. I happened to get some of them. I'm just wondering if Barnes got the issues fixed?

Looking for a 6mm 7 twist medium Palma or rem varmint blank 28" to 32" finished length. 5r, 5 or 6 groove. Preferably Bartlein or Krieger 5r or benchmark 5 or 6 groove.

Is that a rem varmint/sendero contour barrel or Sporter contour?

Looking for a 6mm 7 twist medium Palma or rem varmint blank 28" to 32" finished length. 5r, 5 or 6 groove. Preferably Bartlein or Krieger 5r or benchmark 5 or 6 groove.

I think you will be fine with the 180eld on sheep. You don't want to hit a caribou in the shoulder with it.