DirtNap35's latest activity

Using Redding Type S Match.

@FireFlyFishing factory shot great. No pressures, no hard bolt in or out, and shot .3 MOA. I think you’re right I’m going to start...

After firing it's .5335 and after resizing .532 Virgin brass is .529

Well I’m here to eat crow. My reloading practices are apparently ****. I’m at a lost of what's causing spikes in pressure. I reduced...

May have to move the Reaper I picked up here not all that long ago. Need some bill paying money. 175 rounds slow fired by previous...

Yeah I'm aware of that but take it with a grain of salt. For example as previous member mentioned max load for Viht is 55, reduce that...

All reloading books have to be conservative for legal purposes. Need to keep in mind that Viht is running saami length of 2.953 and I’m...

ADG. When I was going through my virgin brass I did a pressure test and I took it to 60.4 before I got a hard bolt lift. Tomorrow I’ll...

@FireFlyFishing i really didn't ask for advice or help regarding my load dev practices. It was a question about the missing part on bolt...

Oh wow great tip dude on sizing. Mind is blown with your knowledge. Thank you. There is nothing wrong with running a hot load as long...

@Bob Wright Yeah I should’ve paid attention to that. I cleaned it up and looks like new. Going to range this weekend and will see...

Update. I got the new extractor today. I removed the old broken extractor, removed the ejector, and removed the fire control assembly...

You are correct. Berger 156s with 59.2 of N565 and .020 OL. This firing is the 3rd firing for brass. When I did a pressure test with...

I'm currently reworking my load because of this same issue but N565. I did all my load dev on virgin brass. Once I got to 2x fired I...

Yeah I’m backing it down as soon as I get a new extractor. I’m more concerned why I had a sudden spike in pressure with 1 out of 300...