Darkker's latest activity

My American is in an LSS chassis, with a Proof Research barrel for a RPR. Uncle larry was blowing them out on clearance, so I took it to...

Wow.... That was a steaming pile of an article beginning, even for Brian.... Accurate pressure measurement equipment in point of fact...

From a practical standpoint - no difference in speed. If you went from a 14" twist to an 8" twist than, maybe, there would be a...

2 things, if stainless to stainless, use nickel anti seize on the threads. I do not recommend loctite use on any muzzle device. Put it...

I think it will fit just fine. Either as it sits now, or by employing a piece if sandpaper and a broom handle.

1) You need to know the taper specs of the inlet in your stock and you need the contour spec of your factory barrel and be sure the...

Looks like it was not stable enough upon impact.

Everything is about heat, and what your standards are. Standards - Painless is my 308, I stopped logging round count after 5,500. It's...

It isn't that straightforward, lots of different sources fall under a single brand lineup. But here's some broad brush strokes for...

I only referenced the Extreme line of powders for that very reason. Hodgdon are the best liars in the business, they will look you in...

Ain't that the truth. Experienced "smart" guys who miss the details and get "offended".

Hodgdon only sources some of their powder they resell, from Thales. Most comes from General Dynamics, both the Quebec facility and the...

Anyone who gives you a "list" is simply parroting something they only partially read online. The fact of the matter is, temperature...

All powders are temp sensitive to some degree. Some more than others. @Rick Richard is right on. The internet has a way of making way...

Remember that bullet weight is mostly irrelevant to stability, it's length that needs stabilization through RPM. Use the JBM link given...