CNY Yote Hunter's latest activity

Burned out the barrel is my guess... generally the way it presents.....1/4", to 1/2" to 2" groups. But switching out scope will help to...

When guys at the range are having issues I tell them to switch to a known good scope to test a new barrel and then to develop their...

It's difficult to determine what the actual problem may be with the information provided. First of all, the rifle model is missing, the...

I would check to see if the front scope base screw was too long, where it was torqued down against the barrel threads.

That's is exactly what I would do I have had scopes do it before when using factory ammo I would put the scope on a rifle known...

In my experience if you don't keep a good round count it's "probably" higher than that. 😄

You haven't answered the questions about what cartridge and what scope you have. Need to know that before we can give good answers...

A bore scope will answer some of your questions.They are not as expensive as they used to be...

Am I missing the cartridge and powder used?

It sounds way to 'sudden' for the issue to be the barrel. Not to rule it out, but it wouldn't be the first thing that I would be...

Well you already know what you got to do. After you change the scope out, might as well grab some factory loads, and see if shooting...

Have you tried rechecking your distance to the lands?

Have a bore scope? Magnifying glass? Look for a ding on the crown. It doesn’t take much of one. And excessive wear, firecracking etc. Is...

First thing is scope, if not scope, then you may have toasted the throat. What type of cleaning do you do? Have you tried JB Bore Paste...

Action screws loose, scope base or rail come loose, rings etc. I’d retorque everything just to make sure, that’s a big difference in...