Recent content by chazmatic

I need it in the worst way!!

I need a bolt release (the one made on to the sear). This was a poor design. Maybe someone can give me some input. My rifle is dysfunctional like it is!

I need a bolt release for my Savage model 10 .. the release is up on right side of action and made on to the sear. Savage is sending one to me but it is "only" the sear. those people want send you jack unless you have a FFL. DOES ANYONE HAVE WHAT I NEED?

The Remington I have in 308 5R has the HS stock works great. then the SPS was a different issue with the cheap factory stock. I tried every enhancement to no avail. A friend gave me a new take off in a sporter barrel stock. I put the stock on and of course it did not fit but only about three or...

I am looking for a 260 varmint barrel for 700 sa. I have a 308 5r that I want to change out to 260. no 260 aI.

I have shot many pounds of varget. (but) I have settled on H 8208 xbr. Last week I took an eight point at 433 yards with hornady 168 gr. hpbt match. Shoulder shot and he dropped there. (rem. 308 5r mil. spec. I shorten barrel to 22 1/4 ") "It is bullet placement" Hope ya'll have a safe and...

You know i bought two crony and killed both! I will not buy another. My dealing with crony was fruitless. You can get fps on line with input of load (powder and gr. Bullet barrel lenght etc.) this is pretty accurate.

Well did you get one. I got one last week and so far good shooter. I will be developing a load it likes as I shoot . NICE SAKO RINGS! MY OBJECTIVE IS TO DEVELOPE A LOAD THAT WILL NOT BURN THE BARREL SO QUICKLY.

WELCOME!! CHAZ IN USA ALABAMA SURE WISHED I HAD MOVED DOWNUNDER WHEN I HAD THE IDEA BACK IN THE 60's

you know i have found a way to get the trigger pull suitable on the m-mark trigger junk. pull the spring in sear (front bottom 1/16 hex). then i heated it red hot twice to releive tension. then replaced it. IT IS SWEET NOW!!

Well i got mine down to one and three quarter lb. by my scale. The trigger screw can be taken out and put somewhere because it is difunctional period. The real adjustment screw is a hex screw one the trigger assy. only one there. It will adjust down to 1 3/4 (mine on my 700 ss 5r 308} which i...

Re: Left Hand Rifles - How much interest is there in "Ready To Ship" left hand rifles You are so right in the wait for quality . I waited six months for a custom scope for long range hog rifle. The idea of two in popular calibers will sell.

Re: Left Hand Rifles - How much interest is there in "Ready To Ship" left hand rifles Len this is a pretty major undertaking. In any event i know you have made issue of the cost adjustment to make this transistion. I am left handed and shoot right handed or left handed i made it a practice to...

Thanks for the reply and info. I will down load the 175 to 42 or 43grs. Varget. I have a new chrony on the way. It will inhance my shooting i am sure! Thanks again kevin

You know I just got one from w/m and was marked down to 200$! it is a bushmaster 800 with 8x power. it was a toss up between a leupold and the bushmaster. my neighbor has the leupold and i can't see the difference.