cajun's latest activity

My policy is to never sell a firearm. I have never said” dang I’m glad I sold that one”. But I have sold several I would want back.

When you raise the bolt handle to extract the case you hear an audible “ click” and feel resistance due to the web of the case sticking...

Nice! Was this a diy trip or did you have someone set it up? Wife wants to go but I’m a little adverse to a diy trip. I don’t have a...

I would get behind the scope and check the eye relief. You should be able to tell if it moved.

So it looks like your scope moved in the mounts. I would redo scope mount and recheck off bags. Make sure the scope is not fubar.

Sleds are hard on scopes and rifles. The recoil has to go somewhere.

I dont like zeroing off a sled. The gun doesn't recoil or react the same as shooting off a rest or bipod. I’m not saying this is the...

Yes but if you are not bumping the shoulder much you can screw the die in more and it might help. It’s also good to know how much you...

I would get a Hornady headspace comparator and see how much you are pushing the shoulder back from fired brass. You may not be resizing...

The Hornady Brass is not as thick at the web as Peterson or other brass. The web area is where the problem is. Are you measuring your...

Lance I know you have a prc. Have you had the sticky extraction issues?

People seem to have less issues with Hornady.

I would still measure to the lands. I use the Hornady tool. I would see what mag length puts you at. With some rifles and bullets mag...

The fix is to rent the AW reamer and open up the back of the chamber.

What brass are you using? It’s a known issue with the clickers. It could also do what you describe if your chamber is a little tight.