budlight's latest activity

I've written several posts in the past about fire forming correctly. Not the caveman way of some little dose of hot powder and some...

What ever they are sure pop some critters. I saw some parts flying really high in the air. I was actually online looking for something...

30+ years ago a friend said that we should try something different this year for antelope hunting season. We bought TCU's in the 14...

I have 2 frames and 4 barrels but the 7mm tcu with 120 grain bullets and H335 is deadly accurate out to 200 yards (super 14) kills on...

I couldn't find out the BC of these bullets, but with the small HP and BT design it might be ok for a 224 as a varmintor. I just loaded...

I went through 300 55 gr HP's in the first day at the end of may in Wyoming PD shooting. I had only taken 300 hp's and 300 SP's and...

I shoot the 300 hornandy sst 300's out of my 50 cal. Two 50 grain pellets (triple 7) are okay 3 for 150 grains is a shoulder pounder...

This was my old 3 gun match AR dialed in for 62 and 69 gr. The flat spring feels mildly stiffer. At the time of the build the extra...

It's a low round rifle and I machine dimples in the barrels for the gas block set screws. I also coat the barrel with Permitex high...

So Maj. I have a new carbine spring/buffer weight that i will try. 2.9 and seems to be less tension spring.

I know that this a an 11 year old post. I grew up in Oregon. I knew people that profitted off of the BF scam that they continue to...

On my last hunt I had some feed failures. Kind of dissappointing when you steady for a shot and the trigger doesn't break. The 20...

Yes and I went through 3 barrels on my 28 and then 30 inch 30-378. US869. What's your point about barrel burners? I competed in 600...

I'm a long time 26 inch 25-06 and 257 rob AI. Of course longer barrels are free velocity and you can down load on powder to bring in...

I've shot a lot of critters with 243 win. I've never shot anything less than 72 gr HP's. The BC really gets poor below 80 grains...