Bominiscious's latest activity

Once I get to max listed length, I trim to minimum "trim to" length. I use the Forster 3-way cutting heads. Takes about 10 seconds per...

IMHO, let's take for instance the 308 case. Maximum length is 2.015 and recommended trim is 2.005. After sizing my brass, if any is...

I have found that new brass will stretch the most on the first firing. After the first firing, I will trim all brass after resizing so...

For the safety aspect, if you are shooting a factory rifle, chamber a new piece of brass and then run a borescope from the muzzle end I...

You'll likely get different answers on this topic but I trim a group of brass if one piece is longer than the max length spec. I reduce...

I’m still very new to reloading and wondering how often I should trim brass? I know this is going to require measuring each piece of...

55 grains IMR4350 is what my 270 Remington likes as well. That is beautiful work!

I’ve got one in green illumination I would sell or trade. In the box. PM me if interested.

My magnetospeed works fine with my TBAC ultra 7 on multiple rifles…

I’ve seen minimal difference in MV on two rifles I shoot when I got my suppressor (like 10fps range). Cartridges are 280ai and 6xc.

I will say I was able to run a magneto with my can . You have to adjust the sensitivity and it works just the same . No longer a...

It’s too early and the time change has thrown me off. I just realized this question is being covered in a thread literally on the same...

I have a magneto speed that I use to chronograph but I can’t use it with the suppressor. How much difference should I expect and will it...

Great job! I shot my nice 5x5 on the morning of my last day in the Tetons (Pilgrim Creek), Shoal Creek Outfitters, Riley Millward...

Absolutely! Congrats!!