Bobhunts's latest activity

I built a 6.5 RPM.

whatever length you land on, make sure they function well out of your magazine. TOO MANY get caught up in all the Minutia when...

Very nice of you FEENIX to enlighten me on the subject. But the question was directed at blackfoot95 to tell us the method he uses and...

get the hornady OAL gauge and the 7PRC case for the gauge. it is the most accurate, repeatable and easiest way to get the base to ogive...

there's nothing more precise about that chamber than any other chamber. I load a bullet in a case with a bit of lube on it and slam it...

When you raise the bolt handle to extract the case you hear an audible “ click” and feel resistance due to the web of the case sticking...

I can't figure out how to message you. But I'm seeing other ppl say you need 10 post first. I'm new to the sight so I think I can't...

https://www.wheeleraccuracy.com/videos. Scroll down, Alex explains it clearly at least for me

Similar issues for me. Factory Hornady ammo ran fine. As soon as I switched to Peterson brass I started having bolt lift issues although...

Reminds me of the distinct smell of Hoppes #9!

Depends on what bullet you use. For instance, on my .257 WBY, below are bullets I have. From L-R, 110 Sierra, 145 Black Hole, and 163...

You guys must be able to find your lands more accurately than I can with my hornady oal guage. I get 10-20 thou variance if I try it 10...

With VLD Hunting bullets, in my hunting rifle, seating g depth mattered huge. Jam= 1.75 moa .01 off= 1.75 moa .02 off =1.25 moa .03 off...

Seating depth can make a difference, even with Hybrids and Classics. Definitely with the VLDs. But some rifles don't care. I think...

Perfectly said.One thing to also keep in mind about the WSM's,the leads are long and start right near where the barrel starts.Once you...