Bobhunts's latest activity

the side baffle breaks made a big difference in felt recoil. The 300 RUM shot great. The 300 PRC did good as well. Thanks again for all...

Good luck! Most barrels are threaded differently on where they start the cuts for the threads, so timing has to be done by washers. Or a...

I had a brake on a 458SOCOM that needed a crush washer. The washer was misplaced, and I needed a replacement. Just for the heck of it, I...

Here you go: https://lonemountaincommunications.com/rcbs.html

He's a real beauty 4x4 My son and I have been chasing a great bull elk and we went in tonight to see if we could get on him which he...

If you’re in the need to buy brass don’t overlook small rifle brass and small rifle primers which are more readily available and...

Of the YouTube reloading videos I found “Panhandle Precision” to be very helpful.

The illustration below (.338 Thor) shows where the farthest out "I" wanted my bullet to be seated.

Looks to me that you have enough bullet in the case as it is. I wouldn't worry about that old wives tale of needing a full bullet...

Good evening all I recently had a question on Primers as far a touching them and storing them. I just saw this video as well and many...

Varget- Lapua- Berger are the standard go-tos. Almost anything 168 gr will shoot. CFE223 works very well in 308 and it’s a bit cheaper...

Here is my favorite.

I've only tested in 300 wm with 180 HH and 182 HHT with same loads and in 3 different rifles. The HH shoots tighter groups in all 3...

X2. I am PLENTY satisfied with the Hammer Hunter line.

I should’ve said I’ve loaded Hammers (Lever/Hunter) in several rifles over the years, just don’t have any experience with the Absolute...