bluedog69's latest activity

FWIW - In a factory Bergara, I hit pressure at about 56.5gr of N565 in Lapua brass w/ 210M behind a 156 Berger.

Yup,. N-565 produced, the Best accuracy and Velocities for, my grandson's 6.5 PRC, W/ 140 gr. Berg. Elite Hunters, ADG Brass, F-210 M...

My absolute max load is 59.0 gr of VV565 with Lapua cases, BR2 primers and Berger 140gr Elite Hunters. 24" barrel gives right at 3000...

Pretty much all I use in the PRC. I get really good performance on every level and hunt and shoot from summer through winter. It's been...

Yes I need to try the RL26 in it with the 140s. We have shot several groups at about .7 MOA with the 143 ELD X and RL 26. No load...

Noted. I kind of ran out of gas on that thread after a while. I’ll take your word for it and stand corrected. Who knew…..?? I never...

You do realize Muddy your picture is all over the internet???

I would never put LRH through such horror!

This rifle likes H1000 and Retumbo about equally well for 143 ELD X. I hope we can get the N565 to shoot as I bought 2 lbs of it for my...

Their data is terrible IMO. I do a velocity and pressure ladder and make my own decisions. 565 is a little slow for the 140 but it...

I miss the days when Speer manual gave you good up to hot loads. Seems like Just_jon has it right Lots and Lots of lawyers involved in...

Lol. Hey we can’t help it if the 7mm is the perfect balance of bullet weight, sd and bc.

We used H1000 at 58 grains which is well below what Hornady says is max load for 143 ELD X. Zero signs of pressure. This is a .5 MOA...

Thanks. I will have to work my way on up to see what we come up with. Chrono data is definitely needed also. I just hated to start at 53...

So I have the load data from Vihtavuori. It doesn't contain this bullet. Closest is a 144 Berger. They max it out at 54.2(if my memory...