AussieWriter's latest activity

I have an older DPMS that eats everything I feed it. Nothing fancy, but it works.

I have one of those Gen 1 DPMS LR308's and your mate is spot on. It loves Federal Blue Box and puts them just under the half inch. I...

I have found that the 200gn Accubond shoots quite well in the .308 cartridge. That or the heavier 200gn and 220gn Partitions would...

Winchester Model 70 Featherweight. The one with the nicest wood will shoot the best.

Which just goes to prove that cartridges are more alike than dissimilar in performance. Everything recommended will do fine. The rifle...

Good post. Provably accurate.

What are you hunting? For deer I like 140-150 ballistic tips. Depending on barrel length 3100-3200 For elk 160 gr accubond. Not a...

I use 60gn with 180's and 61gn with 168's to get the usual velocities others get with 4-5 grains less so there is no max, only your...

Try the 168gn TTSX and the 175gn LRX and stick with the one your rifle likes best. These bullets will take anything in the US, or...

I loaded for a 18” 30-06 running Speer 165g HotCor SP. I was running RL19, RL22, H4350 & H4831. When Alliant powders were scarce. The...

IMR 7977 and Rel 22 shoot this bullet under the inch for me at around 2950fps from a 22" barrel.

Win 760 is great with the lighter bullets. I get 3160fps from 185gn TTSX's which adds a lot of versatility. 24" barrel.

Scoring deductions are nonsence. If he grew it, it should be counted. Gross is the only true and accurate measurement.

You won't need to rebarrel for those heavier weight .338 bullets. The standard 10" twist will stabilize everything up to 300 grains...

I have a 26" #5 Hart SS fluted barrel Mod 70 in .25/06. Action trued and squared. Added a little freebore, shoots 100gn TTSX's at...