Recent content by AtownBcat

Thanks!! Just what I needed!

That's awesome thanks, mine has seven switches, am I just missing where it says what to do about the last two?

Yes Sir, I just got away from the house without it.

Thanks for the reply, hoping to get an answer before I leave the range.

I have a oerhler 35 and I'm at the range and I am getting crazy readings. Will someone tell me what position the switches should be in for the four foot set up... Thanks

Thanks for the info. I will call on Monday and see if they will send/sale me the rod. I am excited to see how close this unit and my CE mellinium 2 are to each other.

Hey Guys, I picked up one of these off Craig's list for a good price yesterday. I was wandering what it comes with though because I believe the pole used to mount the sensors is missing. I know some of you construct your own mounting system. I believe all sensors, sunscreen and back screens are...

I realize the loss of property is more important than my first ever elk hunt in October. But have/will the fires effected unit 81? It is in the allemesa(sp) area? How do fires once they are put out effect the coming hunting season? Do the animals move back in quickly or does it take so time? I...

OK, so i see your point. My first question about what you said is that .006 is to much headspace and yet my 300WM starts out with .020 headspace. Now it could be that a belted mag is headspaced off the belt so this is not an apples to apples comparison. Im still not understanding what "the...

Mike, I thought I made the measurements you suggested but missed the one for the webb. Maybe you could explain this and anything else i need to measure. thanks

I agree that in the photos the ejector mark looks the same, but with the naked eye, the warmer loads are more evident. You have to look for the mark on the lighter loads. I'm not sure that the brass is soft though because I ran them all over a manderal(sp) die and still had to lube the...

is 500-600 rounds getting close to the average life of an ultra? I have heard stories of them being very hard on barrels.

Ok I have taken a few measurements (with pictures...I know how you guys like pictures) The first is for the neck measurements. I read 5 fired cases and they all read the same so I zeroed on one of them and here is what I got: Next I have an innovative technologies bad *** headspace guage...

Thanks for the ideas. I spoke with my builder this morning and he suggested I go to a 130g Berger. Although I could see the Berger having a little less pressure because of the bearing surface I don't see it solving the problem. I'm 400 fps slow not 50. I ran my brass through a mandrel die to...

Hello all... I am shooting a 6.5x47 and am having some pressure problems. I am using Lapua brass H4350(and a test string of 2000 MR) Federal match small rifle primers 140g A-Max's I have loaded all the way down to 36 grains of bot 4350 and 2000 MR shot it over the CE M2 and registered...