ARlife4me's latest activity

Did you test these on fireformed cases? I trashed some ADG cases and thought I was good. Loaded the same load and was way to hot and...

This. I have loaded for a bunch of 300WMs w. 210-215s. Almost all are in the 75.5-77.2gr H1000 @ 2930-2990 from 26" barrels.

I also agree with the ADG brass. I have ADG, Lapua and Peterson Brass for my 3 different 300 PRCs. 81gr N570 behind a 245 EOL gets...

Agree with this.

I've never had a book line up with anything! Looks like your experience is lining up with that too.

This is what I have found as well. I would never own another Christensen again.

Sometimes ya luck into a fast barrel.

Howdy, you are right there with what I have with the same rifle. With only around 80 shots on my barrel, so I believe it will get a...

You could ask any bullet makers with their reloading manuals and probably get the same response.

I asked Berger that same question: the answer is lawyers and liability.

Not saying your issue reflects mine, but I’ll tell you about my one and only experience with a Christensen. I bought an ELR about a year...

I have wondered why the berger book always seemed to be a bit on the conservative side with their load data. This may be the reason...?

Out of respect to the OP (@jstanton), you might want to consider a separate thread for your specific query and yield results dedicated...

Berger bullets are very tricky to tune. That's all I shoot. In my 308s 0.160" off the lans was the spot. And they don't go to sleep...

Would be interesting to try those same loads in your Bergara to see what kind of speed you get