ARlife4me's latest activity

Great cartridge option! Known for its efficiency & inherent accuracy. My current 7 saum is on a Lone Peak Fuzion Ti Medium, with a 22"...

I was going to state the same thing (port design). Shape, size and angle of deflection. Many "pepperpots" are just as effective...

I think it depends with the port design. In Nathan's MB test with his beast brake, the 5-port performed better than the 4-port.

MDT did a test...

One port on each side...Trick question? Sorry, couldn't resist!

25 yds for me. Gives me a battle sight zero BSZ out to about 325 yds Bullets are no more than 3” high or low out to 325 yds Much...

^^^^^^^This! 👍

It's going to depend on what you're using the rifle for and then the twist rate followed by the bullet choice designed for the twist. :)

It then zeros again at 215 yds and 2” low at 245 yds. So you are within 2” point of impact versus scope 10 yds through 245 yds

I use a 50 yd zero on all my AR’s 15’s and 10’ I just believe it the most practical zero. An AR15 with a 2.8” over bore scope zeroed at...

My AR15 is 5.56 and zeroed at 100 yards. It's main use is prairie dogs out to 300 yards with a 2-7X scope.

50 yards, if it's for CQB (red dot) or 100 yards if it's a special purpose rifle (scope).

I built my 7 saum on defiance long action. Running 24" 1-8.4 twist proof barrel. I throated it out .370" and am running 175 bergers...

I'd go 308win and I'm a 26cal fan! 30 yards is a chip shot as you might like a 6.8spc (my favorite over the 6.5gren as I have both).

If you go Tikka, all you'll need to do is change bolt stops and mag for that length(from what I've read).