ARlife4me's latest activity

btw, there's 2 different medium length action that give 2 different mags lengths. 3.015" and 3.240". not sure about the lesser length?

would it be for acis patterned mags or ar type? some will give you ~2.800-2.830" ish and other (larue and acs) 2.870". i only have...

Matrix was the first to develop the 175g .277 cal, which requires 1:8' or faster. I built my .270 AI in 2012 with a 30" Lilja 3G barrel...

what you could've done if needed is remove the buffer tube and work from that direction.

according to sierra it needs an 8t and their site doesn't give any other info like berger does.

I think a 9 is supposed to stabilize it? Nothing wrong with doing an 8 or 8.5t. Call or email Sierra about it as they ARE good at...

It has been years since the last conversation about knee problems/Surgery and I mentioned I use Boron to control the problem. It has...

I use an RCBS Ammomaster 50 BMG press for the big ones. The press is threaded 1-1/2" and I have bushings for the 1-1/4" and 7/8" dies...

Redding ultra mag

Fortunately, we are currently blessed with fairly large number of quality presses with a good selection in price ranges. The XL above...

Unless you do not have enough clearance to load longer than the 338 LM (i.e., .50 cal Barrett) or are simply looking to replace or...

I would think the Forster Co-Ax XL should do well for you . It is spendy but the life span, ease of use and accuracy of rounds loaded...

Following, Considering a new larger frame press.

if you tried a bunch of different forward assists, and same problem, then it could be that the forward assist machining in the upper...

338lm is the largest long range cartridge i reload for and use a lee classic cast single. it has a bushing for the 7/8" dies and has...