Alibiiv's latest activity

Devcon Steel also does get hard with age. It might be enough to do 10 rifles, but if you wait 2 years between projects you'll probably...

Nope no mechanical lock with any of the Ruger 77 tang safety or the Ruger 77 Hawkeyes. What can cause a difficult issue to remove the...

As I've pointed out repeatedly, the Dev-Con Aluminum putty is actually stronger than the Steel Putty. And it won't rust. Working with it...

If you mix by weight you will get the proper ratio. That said, I eyeball the mix but eyeballing it does take a lot of practice. I have...

I've never had one rust either, but the potential is always there.

HI Arnie, I recently purchased a 300 H and H . First one ever. Pre64 Model 70, from 1949. I bought a box of 100 Rem New, unfired, but...

Great cartridge! I’d get some good copper solvent(I like BoreTech) and give the barrel a thorough brushing. Also check for carbon...

I would try it and see how it shoots. Brass is available or can be made using other cases. Good Luck

I cannot thank you enough for this information, I’ll be getting the Devcon soon. When I do my Rugers I will also remove about 1/16 th of...

Thank you for the feedback on the Devcon. Devcon Steel is the name of the product to get. Is there an outlet where I can purchase it. I...

Really a nice clean job. Did you use regular Devcon. That is really the neatest looking bedding. I’ve been using AcraGlas and I am...

This is what I consider properly bedded. Just popped out, not cleaned up yet. I want support under the first part of the chamber, 1-2"...

Case in point if my little project made any difference. It would take a lot of data analysis to quantify. On the bright side, I got some...

Ok, my thought about two different bedding "times" was that once the action was indexed off the lug, then the second bedding process...

You’re using some terminology that a lay person like myself doesn’t understand. Impressive knowledge but can you define “locate”?