Alibiiv's latest activity
-
Alibiiv replied to the thread 300 Win Mag reloading question.Would you please define "eccentricity" for me in this post. From my perspective, "if" the die is reamed in "ONE" step, with the same... -
Yes that’s all your doing. Just like a mandrel basically.
-
Case head separation doesn’t care if it’s a close range rifle or a target rifle. One of my buddies was grossly oversizing brass by...
-
Just hit them with a mandrel. No need to run a sizing button down into the mouth to expand it, then size them down again just to have...
-
Typically the case mouths are just dented. The sizing button will square them up. Besides the first firing on a belted case is basically...
-
Alibiiv replied to the thread Using once fired brass in A.I chamber.I have two, .270 Ackley Improved rifles that I reload for, one is my son's and one is mine. Both rifles are exactly the same, Ruger 77s...
-
Alibiiv reacted to Joe Entrekin's post in the thread Using once fired brass in A.I chamber with
Like.
One other thing that hasn't been mentioned so far. Using once fired brass may require a good annealing but you will have to try some... -
Alibiiv replied to the thread Using once fired brass in A.I chamber.There is a joke in here on that tight comment, but it probably would get me disbanded if it were to get published!
-
Alibiiv reacted to lancetkenyon's post in the thread Using once fired brass in A.I chamber with Like.
Correct. A tight fit is good. For AI chambers, ladies dresses, ladies jeans, lips, etc.
-
As stated above the tightness is the neck shoulder junction has a .004" jam by design.
-
Alibiiv reacted to MagnumManiac's post in the thread Using once fired brass in A.I chamber with Like.
It should be tight to chamber even on virgin brass if the chamber headspace is done correctly, it should be -.004” headspace on virgin...
-
Alibiiv reacted to Varmint Hunter's post in the thread Using once fired brass in A.I chamber with Like.
Brass should be a little tight when being fireformed in an AI chamber. That is why a barrel is set back before rechambering to AI. This...
-
Alibiiv reacted to akmtnhnt's post in the thread What’s another Cartridge we can Hate/Love? with Like.
There's an easy solution to this. When you buy anything in a new to you cambering, you should also buy enough brass, or if you don't...
-
Someone resurrecting this thread after feeling the heat from the sissy rifle thread? lol
-
Alibiiv reacted to JiggyIi's post in the thread What’s another Cartridge we can Hate/Love? with Like.
270 Weatherby ❗️