Alibiiv's latest activity
-
Alibiiv reacted to JAYgs8163's post in the thread Can you rechamber a .270 WSM to 6.8 by shortening the shank/chamber end and running a finish reamer? with
Like.
270WSM brass made by ADG, Nosler and Norma. -
Alibiiv reacted to bigbuckfarm's post in the thread Can you rechamber a .270 WSM to 6.8 by shortening the shank/chamber end and running a finish reamer? with Like.
Changing the chamber is not going to change the twist rate of the barrel, if it’s a slow twist 270wsm it will be a slow twist...
-
Alibiiv reacted to shooterntn's post in the thread Can you rechamber a .270 WSM to 6.8 by shortening the shank/chamber end and running a finish reamer? with Like.
6.8 going have a faster twist rate.
-
Alibiiv reacted to FEENIX's post in the thread Can you rechamber a .270 WSM to 6.8 by shortening the shank/chamber end and running a finish reamer? with Like.
Not knowing your "actual" barrel spec, this is best consulted with a competent/reputable gunsmith. Rebarrel with the right twist for...
-
Alibiiv reacted to ranch manager's post in the thread The best die lock rings that will never ever come loose? with Like.
That's good information, I've never paid attention or thought about the shot under a steel set screw. All I know is I hate the rcbs...
-
Alibiiv reacted to MagnumManiac's post in the thread The best die lock rings that will never ever come loose? with Like.
Redding are the best out of the box, grub screws are steel, have lead shot under them so they stay put and you can’t over tighten them...
-
Alibiiv reacted to cape cove's post in the thread The best die lock rings that will never ever come loose? with Like.
Hornady make a good lock ring. It will stay put if secured properly...
-
Alibiiv reacted to PopNFresh's post in the thread The best die lock rings that will never ever come loose? with Like.
those Forster cross bolt rings work well for me but they're a little bulky and you have to make sure you can get to them on a fully...
-
Alibiiv reacted to FEENIX's post in the thread The best die lock rings that will never ever come loose? with Like.
I replaced all of mine (Redding, Forster, RCBS, Lee, Lyman, Hornady, Whidden, Newlon, etc.) with these.
-
Alibiiv reacted to med358-boise's post in the thread Weird Browning A-bolt 30-06 Reload COAL with Like.
As I mentioned in Post #7 above, COAL length is a fairly useless reference as soon as you switch bullet types. The tip of the bullet...
-
So, anything over 3.2" with your current bullet choice, you are jamming the bullet into the lands. In short, you are stuck with that...
-
Alibiiv reacted to SecretSquirrel38's post in the thread Weird Browning A-bolt 30-06 Reload COAL with Like.
Loads perfect without a bullet. I noted in my log to seat them to under 3.2.
-
Short throat IMHO.
-
Alibiiv reacted to EFouraker's post in the thread Issues with White River Energetics Large Rifle Magnum Primers with Like.
I’ve been wildcatting for years. The primers are not the problem. Seat the bullet about .030 longer then what you are currently doing...
-
Alibiiv replied to the thread Weird Browning A-bolt 30-06 Reload COAL.I have several rifles that have been built by the same smith on the same platform; Ruger 77, tang safety rifles. Whenever I build or...