BoatTail

Thanks! This is what I decided to do.

I just looked up the cost of an full upper and a complete AR 15 22 ARC rifle and the cost is similar (close). This is starting to not...

Is it possible to convert a Remington R15 from a 223 to a 22 ARC? I just don't know if the components inside the R15 action is standard...

Ok, Here's the final chamber drawing that I will use. I also have a matching cartridge case drawing from Quickload. I haven't figured...

I'll look for those

Thanks for the load data. I was thinking that N570 would be great with the 7mm Blaser Mag or others the same size. Has anyone tried that.

Thanks for the load data. I was thinking that

Interesting! I have two (2) 28 Noslers that are tac drivers (3/8" or less) but I don't need that much performance or bullet weight...

With this information, I think I'm going to order the reamer. I think I can reach my goal of more performance than the 7mm PRC & 7mm WSM...

Thanks

Does anyone have load data for the 7mm Blaser Mag or AI version of that cartridge? This is the closest cartridge to what I would like...

Yes my 7 LRM was built by Gunwerks and had a #5 fluted 26" barrel. We shot a lot of Antelope with it but I didn't like the way the 180...

I actually like my 7mm WSM. I have a longer Freebore and with RL26 and a 162 gr ELD-X get 3133 out of a 25" barrel. They key seems to...

Can you tell me what velocities you are getting? I found this in another thread on the 7mm Blaser Mag. The numbers seemed high. That is...

Note that the case volume of the dummy 7mm NSM is approximate, as I formed it using 300 and 7mm WSM dies and a Nosler case. If i...