parshal

^^^this^^ Thank you! I might use a mandrel if there are neck dents. High quality premium brass shouldn’t need a lot of extra work...

I'm probably going to hear a lot of grief, that's ok but with ADG and Lapua brass, I pull it out the box and start loading. If necks are...

I treat new brass just like fired brass. 🤷‍♂️

That is correct.

Absolutely correct. There is a big demand for general gunsmiths but that is something that is hard to learn on line. Like my fiend Roy...

If only Buck-ee's would open a reloading department. We could all get what we need in one stop, and then we would spend 4 hours there...

Regular cleaning will not do this. No matter what you are using (unless you used a hardened tool steel solid rod and a chipping hammer...

Agreed. I have a 260 that looks like someone used a 1994 Skill cordless drill to cut the chamber. It shoots, so I solved the problem...

a lot of factory rifles will have those tool marks. If it shoots don't worry about it. Now if one of my custom barrels had that I...

@Huntnful and @Hondo64d touched on it. It isn't just about group size. It is about is Point of Impact the same as Point of Aim? i.e...

I do find this topic facinating. I have many years work experince with statistics and am amazed how I have never really put that...

The increase in group size with an increasing number of rounds is normal. Five shots is actually a very small sample size and if you...

No one shoots 10 shot strings with a hunter. Literally a wast of time. If you want data do the 5 shots over and over and record the data...

A 10 shot group waiting 3 minutes between each shot is 30 minutes. In 30 minutes I could have fired 10 shots at varying distance in the...

I know GAP claimed the GT to be THE fix for prs mag fed rifles. I personally feel a kitted aics mag with a br variant is prob more...