6.5x300 WBY's latest activity

I do the same, full length size, chamfer & deburr, measure and trim if needed

For many years, I loaded new brass right out of the packaging. UNTIL the neck ID of a batch of Lapua 6.5-284 brass was so tight that I...

I recently purchased 150 ADG .28 Nosler brass for a wildcat. Just to be sure, I stuck my primer hole uniformer in one. There was a...

Hey, first rifle I bought myself was a 700 BDL in 7-08. It was 1981 in Denver CO, I traded in a 99% Rem 1100 12 ga plus cash. Still have...

26" 338 Lapua 90.8gr N570 w/ 300 Berger Peterson Brass Fed215 2800 FPS

Im trying to get max velocity but safely i got just factory barrel on 338-378 but a 28 and 30 inch barrel on my 338 rums

I loaded the 270 grain eldx

My efforts are to start at the same point every time. I process my brass the same way no matter if it's new or fired. Full length sizing...

What have you loaded in your 338-378? I have 300gr Berger 285gr ELDM's 267gr HHT 230gr ELDX's Right now since this is a relatively...

568 runs closer to 570 speeds ~30fps than 565 does with more case fill. 568 is a little slower burning, but provides more fill. 565...

I also have a 338 378 interested to know how it does

Thanks for the info guys .I may try the n570 and might try the n565 i have a 28 inch barrel

I’d go with the 160gr Partition & never look back. Has worked for me on elk since the early ‘90’s.

...a good old fashion ho-hum plain Jane 150/160 Nosler Partition, time tested and hunter approved for 60+ years...

I’ve shot deer and elk with 160 accubonds out of a STW at 3350fps or so. Never recovered a bullet out to 500yds or so. I’d have lots...