Bowfishn

I had a similar experience with a custom rifle, of all things. The simple, no-cost, solution was to use a set of Burris Signature Zee...

18" - you know he's shooting suppressed, and he can't worry about dragging a long barrel through the thick stuff while trying not to...

He must have a slow barrel, or maybe only 20"

Well, here is my sissy rifle. 18lb 6 creed with a brake. So little recoil its hilarious

I thought that the creedmoor was basically a necked down 30 TC ??

I remember quite a few years back when I put together my first 6.5CM on a Savage 110 action, I started testing with RL26 and found out...

+1 on that, but there are many out there that buy the PRC and shoot factory loads limiting themselves to upper manbun velocities.

It will put your CM right there with Factory 6.5 PRC

Still cheaper than Blackhorn 209

I found the test done by Amp quite interesting, as far as burning off Zinc in Brass...

Congrats on a successful Elk hunt. Great Bull Elk. Good choice of bullet. Nice shooting.

13-year-old young lady shoots her first big game animal at 345 yards with a Seekins 6.5PRC and the 124gr Hammer Hunter bullet. Cody...

Your new barrel has not been broken in yet and it stands to reason and a load of experience than new factory barrels rarely if ever...

But they list a factory loaded 129 sst @ 2950 fps with a 24" Barrel. Even Hodgdon shows a max load with 130 gr Nosler AB at 2889 fps...

In all fairness the Doughnut or Reluctor wheel, is most likely a Clock seeing how it has 12 positions. In my old line of work we may...