AZShooter

Thanks to Cameraland I won a GPO 10 x 40 rangefinder binocular! Doug asked me to post a review. When I opened the package, I was...

So many chamberings so little time...... Here is a thought. Instead of creating new rifles. Remove and save the current barrel and...

Alternatives: cut, or button. I suppose some shorter barrels can be broached. As to hammer forged barrels: Remington barrels must...

Glad your barrel now fits properly. Darkker is right the T3 barrel has the same 1"-16 TPI barrel shank as Ruger. It is longer though...

There are two rimfires you can use for javelina, the 22 Magnum Rimfire and the 5mm Rimfire Magnum . Heck you can even use a spear...

JasonT, You could use some H4895 for reduced loads. Hodgdon lists a 125, 130 and 130 gr bullet for the 300 Win mag at a velocity of...

HMR Johhny perhaps this will help: When the cartridges are in the magazine the belts should sit directly on top of one another. When...

Interesting comments everyone. There are some cartridges that are almost AI cases like the 284 Win with its 35 degree shoulder and the...

You said you started with a 68 gr load. This is the max load that Nosler lists. Did you try lower powder charges first? If not, you...

I have never seen any condensation inside or outside of the barrel. I suppose other parts of the country with higher humidity might have...

30BR, 6BR, 308 Win, and of all cartridges the 338 RCM: 54.5 XBR 8208 with 185 fusion 2784, 2785

I have used towels and even running water. At one point I remember reading about a small CO2 tank that was featured in an ad in...

Almost. If the shot was any longer it would have ruined that morning's hunt. Took a Ruger M77 to NM for a five day deer hunt. On first...

An easy in-between way to step down the neck is to use a seater die with the stem removed. Then go to the 25-06 FL die.