436's latest activity

Varget = VV N140. Check a Powder Rate burn Chart. At the cost of powder and primers. i would humbly say that VVN135 is a waste if you...

I have reloaded some nickel-plated brass in the past and had no problems with it. It was Winchester brass in .300 WM. Jump forward...

Yes, that’s your extractor. Call Terminus and they will more than likely send you a new one. If I remember correctly there was a serial...

RedFir, Welcome, I think you'll like it here, great folks, great information, and many knowledgeable people on the forum. Cheers.

I'm an avid gun enthusiast ever expanding my knowledge and experience. I have only recently been getting more involved in long range...

I used to teach Jr. Rifle at my home range. We had Winchester 52's,Rem 40-XR's and Anshutz that were if I remember correctly 54's . All...

In addition to the above versions of the model 52, they also made a sporter version, best of the best for a squirrel hunter.

So, let's say the rifle has a 24"-inch barrel and you are using a 150gr bullet with a velocity of 2900 fps, and you are zeroed at 100...

he will build a "what every you want cartridge" and possibly a longer barrel if you want? certain brass and cartridges have been tough...

Haven't read past first page, but I see no mention of actual velocity, so, I will say this. My REM 700 SPS in 300RUM has zero issues, it...

Dead-Hold

Does it have the Dead-Hold or the V-Brite reticle? Again, I'm just thinking out of the box. Cheers

Then here is quite probably your problem. Never weigh and strap down a led sled, in fact, ditch the sled altogether its a design that...

What scope and model are you using, does it have good parallax adjustment on it? I know it's a long shot but I thought I'd ask. Cheers

That's when you open up your own hunting season😉