Trnelson

Just bought 500 of the 131 matchkings so I can finally stop shooting hornady all together. Very happy with these so far in my 25 creed...

Thanks to all for the advice! I set up a collet chuck for the lathe to turn five cases to test with. I also used a VLD style chamfer on...

I would imagine. Looks like I’ll be setting up the lathe to turn the 200 cases I have for 22 ARC.

Me too! It’s like watching paint dry, concrete set, and mud puddles dry up on a job site. I went with only Hornady cases for my 6.5...

Yes, but there is a bit of resistance

No, sounds like you have a seating problem. Either crushing with the seating die or your neck tensing is so high you are crushing. What...

have to turn the starline 6.5 Grendel to .2495 on a loaded round for the .254 chamber neck, the brass is just too thick for the 22ARC...

Yep. Im starting to compare the arithmetic

Band new brass.

New Starline 6.5 Grendel sized down and then trimmed to 1.520”. That seems to be the case that it’s collapsing the shoulder at bullet...

22ARC 77g TMK in newly resized and trimmed Starline brass. At resizing I’m measuring 0.426-0.427” at the shoulder, these chamber and...

Looks like a good opportunity for a new thread. My apologies to the OP.

Good place to start looking for sure. I’ll have to cut a case and take that measurement. I have measured a majority of the cases now out...

Staball 6.5 with a Sierra 77TMK has been lights out in my 18”suppressed rig. I swapped to a H3 buffer that I added 150g of lead to and...

My daughter was hit in the head by a motorcycle while working a motocross race and is in critical condition on life support. Please pray...