Dr. Vette

He hasn't been here in 9 months, so you're better off sending him a PM if you want to sell the brass.

The "long" version of this is the 146 Hammer Hunter.

dogz said: Im going to try out some 131 Shock Hammers over RS Grand. It should be humming! My concern on the lighter bullets (even Mono)...

I've got that on my Ruger American 450BM and my Rem 11-87 turkey shotgun. They work great. Watch where you put the seams when you wrap...

For #2 I get a self induced migraine watching "The Real Gunsmith".

I've had several patients get this done, and they're all still here. If done electively it's usually done with the laparoscope, and...

I'd probably use the 0000 steel wool or fine sandpaper, but actually tape off the checkering. I don't think you'll notice the gloss...

I've not done the Customs thing with a rifle for the hunts I've done in Canada. However, you do need to fill out a Canadian form, and...

After applying for resident only Michigan elk since 1984, I finally drew a bull elk tag. The elk are mainly located in the northern...

I kinda like the idea of a 338 RPM. I was going to build a 338-06AI but thought I’d go RPM instead. No fireforming, more case capacity...

I've not tried warming it, but it does get nearly rock hard with time.

Devcon Steel also does get hard with age. It might be enough to do 10 rifles, but if you wait 2 years between projects you'll probably...

I’ve never had success doing this. You never seem to achieve “perfect” alignment between the first and the second bedding. FYI, on a...

It is MUCH faster, but I find it to end up with a glossier finish. I've not tried a "less glossy" version of ArmorAll to see if that...

I've used a 50:50 mixture of the two rather than apply the ArmorAll first and then the TruOil. It seems to work just as well, and it's...