belldar

Because my dumb butt went to DSC this past weekend in Atlanta and looked thru some other brands. Trust me, I’ve never had NF let me...

Why down grade and go with a lesser optic? Stick with Nightforce. That said, the only other option I would run would be Trijicon.

I’ve owned about every brand of scope there is and will not own any thing but nightforce after by brother dropped my rifle from a tree...

Grooves. Could click my nail in them. First die I thought was my fault for not chamfering the new brass before bumping the necks...

Lots of inspection and polishing after it started scratching the necks. Not sure what to say as I have never had the problem with any...

Good to know👍. So your saying you can also use the 7 PRC mandrel on the 6.5 PRC? I see there is a 7-30 cal PRC mandrel and a 6.5 PRC...

What I do with my PRC, that seems to work is to double size. First with the Forster die for initial case sizing and shoulder bump...

Yes. Always

I did not try any other PRC brass. Shoot 300WM ADG brass and have not had an issue, but that is with RCBS dies. That was actually my...

ADG

Talked to them on phone. They sent new die. New die did same thing. Great CS but sometimes you have to move on after two fails.

Yes. And than it happened again so that’s why I am looking for something else.

Any other sizing die recommendations? Had a Forster seating die and it seemed like the metal was to soft and scratched my brass.

Well this rifle is 9.5 lb Without the scope. But I like the 300WM inside 500 yds because of its "whompability". Its the same reason I...

Those are my favorite three brands right there. All goood to go😉