pantiti

As an update order has been placed 10-14 week lead time. I decided to go with a plain 223 wylde chambering due to concerns with throat...

After doing som seating experiments I decided to seat an 88 eldm just so it functions my magazine, turns out the Ogive is at the same...

28” Long and heavy. Bench only. Not pushing it hard at all. Maybe will run some hotter this spring.

What length is your barrel?

Still finalizing but here is a pic of last three groups shot. Mines an AI so speed will differ but I’m not pushing it at all just...

Loaded some 80s out to a coal of ~2.57 this where I get full contact with the shank and neck. I have a 223 Wylde AR 15 and I seated a...

I really appreciate everyone's help! I am settling on 75 and 80 eldm. It seems like a better fit and I don't want to build around an 88...

This one might be of benefit to you if you are looking for Ackley loading information. I started this thread over on Snipers hide back...

I built an Ackley just for the purposes you mentioned. 20” 7tw with longer free bore. Now I realize you did not mention a 223ai, but I...

Where are people getting AI data? I'm thinking about going that route. Just picked up one of those credit cards with a $300 bonus I'll...

I'm not sure you would gain much velocity. Maybe 100 fps... I'm not sure.

223 wylde is designed to be compatible with 5.56 NATO as far as I understand. If you read my attachment it discusses the pressure...

I'm not sure staball 6.5 is the right powder for a 223. I have attached Hornadys load data for 5.56mm nato with 20" barrel. I plan to...

Are you running staball 6.5? What bullet are you shooting? Hornady load data shows 2700 with a 20" barrel for their 5.56mm data.

Thank you for this info. The eld VT does great out to 400 but that is when the 88 surpasses it. The eld VT definitely has a lot to offer.