Huntaddict

I have had a 7/300 for 5 years. Reading 300 PRC type S with a 310 bushing Buying 300 PRC brass. you will likely need 3 bushings. 323...

Holy moly! that’s some nuclear copper rocket velocity!!! Wonder. barrel life with that?? Love my 7/300. Almost to the point that i...

I ran up to 100.0 grs. Retumbo with a 180 gr. for years at 3360 fps. 26 in. Barrel. I'm running 92.0 grs. N570 with 215 Berger just at...

Looks like Weatherby just announced it is chambering it in their 307 and Mark 5s

I own all 3 and have run the 30 Nosler itself since 8 months before it was released at SHOT show. I don't mind recoil (hunting BIson...

Steel cases are not very reloadable. Its possible, but getting one stuck in your die no matter what lube you use is almost a given. If a...

I hear you, they are probably using a blended powder - which is common and often used to maximize FPS for marketing purposes.

Second this Pretty broad spectrum of velocities and performance. I have personal experience with 6.5 GAP that i have owned and shot...

Of the cartridges mentioned, the 6.5SS is a kissing cousin to the 6.5 prc. The 25 prc won't do anything the 6.5 can't do better. The...

Ok, taken with a grain of salt - this is Spomer talking about it - 80k psi made with a steel case smaller than a 30-06 - so maybe...

This is an awesome promotion!! Appreciate you all

You are doing 1/2x28? Bolt guns usually spec 5/8x24 - unless you have a can that you wanna swap back and forth...cool .640 should be...

Has to do with available metal thickness. What is the Mzl diameter of your barrel? The general guideline most smiths use is min of .550...

Agree - BDCs might be good for a Mzl ldr but outside of that, they had their day and I personally think they are obsolete at this point...

Bahaha, its easy to get analysis paralysis. I am with you, thinking back to being 16 with no money, being able to scrape up enough to...