X'n Tex'n

Jeff, I am sorry you are having issues with your rifle. As others noted, you might have two issues here: the rifle's barrel and...

PTG has a T-handle for their reamers/throaters. I bought one to do a 338 federal that wasn’t headspacing in an AR, did it with the...

If you have a set calipers, measure center to center of the mount holes. Call or email EGW to see if they make a base that match the...

It boils down to preference and budget. A lightweight chassis is a hefty investment. If you do not have hands-on experience with one...

Isn’t the Mega a closer loading than the SS?

Still way to slow. N550 gets there but may not be the best.

If you have IMR 4064 you can do the same with 42.8 as the mid point of your range.

^^^^^ Disagree, carbon fiber is a poor conductor or heat. It feels cool because of this. A CF barrel works like a heat sink meaning all...

Will filing an angle that matches the scope bell give enough clearance? If so, remove the barrel 1st, then take your time and do a nice...

wouldn't your action eventually stop that issue

If you remove material, just remove enough to get action to slip in.the tighter the fit the better. That's why we bed them. If you plan...

Sounds like the cat's meow. I would jump on this mt-jonas. Cats are awesome... today

I didn't get a weight on just the barrel but I have a kreiger #3 finished at 23" spiral flute, threaded 5/8s it's on a 700 action with...

I have a new stainless Hart (#2 I believe) in a 9 twist 30 cal sitting in my office just looking for a new home. As long as you're a...

Check out Wolf Precision podcast, episode 188 for his take on carbon wrapped barrels. I have to agree with his take on barrels, as I've...