med358-boise

"Safety" is always a personal issue. However, a few things to consider. 1) Primers are the weakest point 2) SAAMI spec for the 30-06...

When loading in a magbox my general clearance is 0.010". Then test for reliable feeding.

Let me try to be clearer in what I am asking - Regardless of desired bullet jump, sometimes mag boxes are a limiting factor, so for...

FEENIX - do you use .030" as a rule of thumb or is that just the way it worked out? In other words, do you always like to .030 of...

What amount of clearance do you use for your cartridge COAL? In other words, regardless of your desired distance to the lands; you...

Just thought I would pass along something that has helped me improve my shooting between range trips. The side yard of my backyard has...

Three options and it's really a tradeoff of time vs money. 1) Make it from 270 Winchester brass - lots of instructions on the net if...

I think some of the most important questions have no "correct answer" and can only be answered by the customer. In no particular order...

The CFE-223 info is interesting. I have experienced no impactful variability. While it's not part of the Extreme line, I have shot it...

Oh for God's sakes...now you are just rubbin our nose's in it. 😄 Please nobody ask Wildcat for more pictures, I am getting depressed.😆

Wow!!! Huge congrats to your wife

You may wish to consider the following: 1) The purpose of applied mathematical analysis is a decision not a number. 2) I believe the...

Berger list a load of 42.4 to 47.1 for their 135, 2780 to 3042 fps. While the bullets are constructed differently, you can compensate...

Things to consider for an all around hunting caliber. 1) For hunting cartridges, something that works under poor circumstances as...

I have also found Federal 150 grain copper to be very accurate in 4 different 308s.