Mickp7

Appreciate the detailed response! My system is almost exactly the same, including the Wheeler level system, except I haven't taken the...

Just curious.... how do you level your rifles?

yes, but it was either/or. I don’t own both.

Now they didn’t mention that… that’s good to know, would’ve been better to know a few weeks ago!

FYI, found out the hard way that bottom metal options changed recently due to some redesigns of their actions. I have a medium action...

.270 Interesting… my formed and loaded brass is .461 or .4 at the shoulder/body (just before taper to the neck) junction and .467 on...

SAC, 6mm x 30 degrees

It hangs up about .040 from the case body. It’ll go in so far, but expansion at the body/ shoulder junction stops it. Therefore there is...

I do have a note into them as well. Thanks!

I appreciate the input guys. All my other cartridges took more than one during to form to the chamber. This was one firing. Fired brass...

Bushing with mandrel. ID after sizing is .240 giving me .003 neck tension. So, brass thickness is about .013 on the neck...

Look at the Vortex Razor HD. They are in the price range you requested and are very good glass for the money. 10x is probably the sweet...

I purchased a Seekins Havak PH2-NRL in 6 Creedmoor and recently finished firing my first 100 rounds through virgin Petersen brass...

+1 for SAC dies. Expensive, but they are the best I've seen/ used. Full size dies come with bushings and mandrels. You can talk to them...

Welcome to the forum. +1 for Nightforce, NX8 in particular. I'm assuming this is a long range rig based on the caliber, in which case...