HSmithTX

Alliant data has a 180 nosler partition in their data for RL26, DATA is linked here. It will get you a decent starting point.

RL26 is the easy button, it will drive a 180 well over 3000, I loaded 212 ELD-X into the mid 2900's with it loading VERY long, don't...

I have a couple 7 rougue reamers( 7/300 aI 37° shoulder. I make my own dies for the reamer design. Shoot 190 atips high 3100s with...

The 7-300 is something I would really like to do. I know that I could get close to STW speed but the availability of brass makes it a...

Have you looked at load data for 110 or 120 grain bullets? I’d think a starting point low charge load with a 110 HP or 120 soft point...

For me the Little Ba$tard from APA is plenty of brake on an 8 pound 300WM rifle that ends up hitting the field at 9-9.5 pounds, it's a 3...

Update on the reloading bundle. Of course she is taking her time, so I just went check out the reloading room yesterday. I'm waiting to...

Great info, I will look into a 7LRM again now that I know there is good brass, no way I was touching it with Hornady brass. It seems...

I like it!

H4350 will work and work fantastic. That said you are leaving some speed on the table vs H4831, is it enough to matter? To me it's not...

It doesn't have the capacity of the 28. I think it's down 6-9 grains, 10-12 grains in a straight 7-300 if I remember right. I looked at...

The only superior 6.7 is the one that rhymes with Cummins:)

The Browning X-bolt magnum action is long enough, might find one at a reasonable price. I load for 2 in 28N and both are .010" off the...

I always go into selling items on this site knowing that I am taking a loss so I will price most items already at a good discount just...

^^^^THIS^^^^