RckyMtnRutt

Yes, i think you are exactly right. These are my thoughts as well. First time trying this out and i was left with what did i just do. I...

Im not certain I would trust any group size shot from the bed of a pickup... seems like that would add to barrel harmonics? There's a...

Thanks for all the feedback and yes i know i should have done 3 shot groups. I guess i usually do ocw. This is my first time doing a...

Thats called a pressure ladder not an OCW test. Though since you shot at 300yds you might be able to pick up an accuracy node between...

Any chance you could post just the portion of the target containing all your hits? The text on the powder loads is too small for me to...

From your velocities, that would suggest a point worth investigating, but your POI is all over the place. Looks to be more of a...

What you said ^^^^^^^^^^^^^^^.👍

So i just ran out today and did a 10 shot OCW at 300 yards. I know it isn't a ton of data to go off of but trying to find a load for my...

**** Feenix that is an awesome group for a shorty 300 at 200 yards. Looks like a need to try some bergers as well. I just have always...

This is an old load of mine using H4831SC (75.5g) and 190 Berger at 3043 FPS out of SAKO M995 TRG-S in .300 WM 23.5" 1:11." I was using...

As always thank you guys for all the support! I was actually able to find some h1000 at scheels today for a pretty decent price and 4...

I've used a lot of the 4350 powders and Reloader 22 in my 300 Win Mags,then I tried Hunter powder.It's burnrate is around IMR4831 and...

Neither powder is what I would choose. If you want the best possible performance go for H1000. Nosler Accubond 180g H1000 max 81g. WLRM...

Been using H-1000. @ 79.5 gr with the 180 SST , and LRMag Primers! This has worked for me for Years!

As with anything else, YMMV. Between the two, "I" would go with the H4831SC.