Jim’s Hunt

I would say yes by taking of about 1/4" of tenon rethreading a rechamber with a long throat. I just don't see any benefit in doing so...

Hunting in northwest Colorado 10 to 12 power binos are a must

I am not either eye dominant but maybe slightly more left eye and have used the Vortex Fury and the Leica for NRL Hunter competition and...

Range finding is the only way to go now days

Just need to clean the barrel a little more often. Not a big deal with some of today's products

Nosler also have a 165gr Accubond LR

270wsm 7.5 twist 175gr sierra TGK 3050 fps.🤮 on 6.8

Decision Decisions 🤷‍♂️🤷‍♂️

I bought some nosler for 280rem, only stuff available at the time. Primer pockets got loose in a few after a little stress in shooting...

I'll take federal brass over nosler.... complete trash

Nosler is way, way over rated and too expensive. It's ridiculous. Very disappointing entirely.

My old burnt out 7rum was shooting 160 Accubond at 3350 with Retumbo powder I never had one of them come apart until it hit its target...

Tipped over a big cow elk last December with a 270 WSM with a 175gr Sierra TGK going 3050 fps one shot dropped her

I've got a 270 WSM 7.5 twist 24" using MagPro and 175 Sierra THK. Not a screamer at 3050 but did good on an elk last year along with a...

I use a Fat Wrench for ring and mount screws in the 15-25 in lb range and a Proto 1/4"dr. Wrench for the heavy torque on rings on pics...