PatriotHenry

You just get them to associate 2" shank with 6" shank and you're the man! I think you need to call it "Tenon" and we will stop with the...

ideally going from short mag to long mag saves more barrel w/o the need to cut off tenon when going to a longer cartridge? that would...

Unless you exceed the standard length of the barrel maker's steel, there should be any additional cost. I've been ordering and making...

The area larger above the chamber on a barrel, this is the technical term. Of course, no taper barrels don’t have one. This term...

If we are talking hunting rifle contour, then it depends on the length of the Knox form AND diameter. If you have two distinct...

Thanks! 200 grain Partition. I've been meaning to try some higher BC bullets like the cutting edge, but these danged Partitions shoot...

I got this great bull on day 5 of Colorado second season at a little over 200 yards with my 8mm Rem Mag. I did a fair amount of hiking...

Left to right 280, 280rcbs, 280 ack, 7mmJRS The JRS is about as far as you can go with that cartridge. Maybe the 280 Sherman goes a bit...

Hatch Outdoors https://www.hatchoutwest.com/shop?store-page=Bipod-Standard-27-with-ADM-Clamp-Head-for-Picatinny-Rails-p451950948

Great father and son moment. Young man took a 200 yard heart shot on a doe with a 22-250 and the 57gr Hammer HHT with a MV of 3700FPS...

Love my LTI, Makes all my rifles sound like a 22 lr. My son shot a deer last week with my 6.5 grendel, and I could hear the bullet...

In my experience the larger Cans are my favorite .. I have no knowledge with Dear air but I'm sure they make a solid product. out of...

Got really lucky as a non-resident to draw one of the two NR Muzzleloader Elk tags in a top tier unit. With the rut just ending, the...

I've been archery hunting and hunting with the kids the last few years so haven't posted/shot much. This year I got a Colorado antelope...

I would think a good minimum to adhere to is 1800fps for RELIABLE expansion, except those bullets INTENDED for LR hunting. Berger are...