Mram10us

ttt

Thank you!

I have a go gauge you can borrow. Use a piece of tape for the no go

Kampfeld customs is next door to your east. Might want to call him when you are ready

built many rums and edges and the case is extremely accurate. h1000 is the ticket. reloading components are easy to come by with many...

Thanks for all the responses. I haven’t been on in a while as life has once again become busy with my job and work. Maybe I’ll have...

try some scrap at first. i did many practice runs on old takeoffs and scrap bar stock before my first barrel. lots of good youtube...

Krylon, sponge from Walmart, and airbrush blending. My first attempt, kinda happy.

His and hers 22lr rascals for my kids. Use a clear coat over it and the paint should last quite a while.

This stock only had the Olive spots from Manners. I added the grey and light green, plus a matte clear coat. This stock only had the...

I would rather have the paint jobs shown on this post by forum members than most of the commercial offering I've seen. Good job. I will...

This was larger sponges and less paint dabs. You could add less paint but I was having fun and kept adding colors and sponge dabs

i would buy one new and resell it on the forum when done. you have no time limit and will not lose much money

the first time you will take as long as you think it will take , the second time you ll do it in 15min too second hand barrel wrench...

exactly. took a barrel off a tikka today and had a 4 bolt barrel vise holding the barrel and an action wrench with a 2ft cheater that I...