V35BTC

Long XL Lapua

I started using UM Bottom Metal and 4" mag on the 30-378 builds I have done recently. All builds prior to this were BDL and wyatts...

I have done several builds on 22” light rifles. 28 Nosler, 7 RM, 7 PRC, 7 Saum, they were all great. Components varied, actions were...

Not touchy at all, but there seems to be an awful lot of guys on this forum that don't seem to realize that ringing gongs at 1000 isn't...

Dont rule out the possibility of using 9/16-24 threads. Several muzzle devices are available in that configuration.

28 Nosler, love them! Hod rod cartridges are like top fuel dragsters, they are fun, go fast, and both eat large amounts of hot burning...

Not the cartridge.

End of story: First, thank you Elk Hunter 338 for your offer to professionally mill the rail and refinish the metal work properly...

I’m not sure on the barrel life but the re coil is not bad at all on my with a 23” barrel ,I’m only putting 81.5 N570 powder with ADG...

I did one on a Rem 700 VSSF 22-250. I put 1/2” threads, made an adapter to 5/8” and blended the flutes on the mill. A little bead blast...

Coup De Grace should be considered.

Those are great, I also made one that works on the Terminus and Curtis Bolts. I normally just put it all in a gallon ziplock bag, hold...

Thats real close, .015" off touch, they shoot good at .055” off as well.

I see their point, its just business. I just had to pay for a Die to make a certain aluminum extrusion I need a run of that nobody else...

One of my 28 Nos. Reamers I had made to use the Berger 195’s with a 3.8” length coal. These work real well loaded just short of that in...