Doom2

I’m more interested in accuracy, but I hope some speed comes with it . I’ll try one powder and see what I get . If it doesn’t blow my...

No idea on the fixtures. Bartlein most likely supplied the test barrels

That's some consistency in the group size. Curious, do you know what type of fixture the barrel/receiver were mounted in?

Cutting the solid portion of the muzzle off will change how the muzzle expands as the bullet is nearing and passing the muzzle exit. In...

This is a description of what happens as the powder burn rate is changed. To understand how powder speed plays into velocity you have to...

Expanding a little bit on what Alex has so simply put I'll add this from an engineering analysis standpoint. The theory of adding an...

In my 260AI, I have used both SRP & LRP cases. My 6.5x47 only has SRP brass with the small Euro sized flash hole, on 20 cycles and...

I've not encountered many issues with Lee dies that didn't have an operator error going on, amd I use them as my first choice, where...

You should call Lee. They may have a different seating stem. I had the opposite problem with a 223 Die and they provided a different...

If I had 2k extra to spend on a scope i would buy something besides the arken. Probably something used. But If I only had the 2k in gun...

Here is a good review by a guy that knows scopes if you haven't seen it...

Hornady designed the ELD-X to expand at lower velocities and at longer ranges and originally recommended its use beyond 400yds as I...

See if you still think so after you read those articles in the links above. If you found a charge weight using The Satterlee Method and...

Recoil is a result of accelerating the bullet and and /powder gas up the bore of the rifle. You can thing of it simple as F=ma where m...

https://saami.org/wp-content/uploads/2022/11/Gun-Recoil-Formulae-2018-07-9.pdf ETA: Consider the formula provided as it gives some...