Georgiashooter

I should have also stated in my earier post, the new manufacture actions, prefix RAR, are very good actions. I’ve yet to have to true up...

Yep….what @Georgiashooter said. My Gunsmith (who built my SML) had to remove the handle on my stainless "RR" s/a and tig-weld it back on...

..dollar for dollar can't be beat. A little truing by a competent gunsmith and your good to go. As a range master for a decade I got to...

Yessir. Bolt handle has to be heated and taken off, placed in a jig and preferably tig welded back on.

The RR actions in particular are the ones to avoid. Picture attached showing severe lack of primary extraction on a 300 RUM we took in...

I won't tell you what to do here. I think you can do it for your price. Elk at 750...I probably would just go 300 win mag. You say you...

It was a humorous, friendly thread until the Karens showed up to preach from the moral high ground. What are your pronouns?;)

A better test may be doing a cold bore shot for three days in a row and verify your POI is holding .5 MOA, it is a hunting rifle and...

I'm not advocating against shooting more, I just don't see any reason to shoot 10 shot groups when tuning a hunting rifle. The first...

I didn’t read everyone’s responses, but first page and a half. I load develop shooting 5 shot groups unless I’m shooting a larger...

Stick with your 5 shot groups I don’t think you would have to worry about 10 shots out hunting

A 10 shot group waiting 3 minutes between each shot is 30 minutes. In 30 minutes I could have fired 10 shots at varying distance in the...

What’s the point of a ten shot group? If your shooting half moa 5 shot groups, that’s better then 95% of the people on this forum. 10...

I cut mine down to 3 shots. Once I am satisfied, I do cold bore shots, which require multiple cold bore range times. Ask yourself, how...

I just looked up the cost of an full upper and a complete AR 15 22 ARC rifle and the cost is similar (close). This is starting to not...