I`m sticking with my original thoughts. Looks like edge of mag box to me. Some pretty knowledgeable guys on here to help you out though.
Welcome. Are you sure the "chatter" marks are from the ramp, and not the top front edge of the mag box? Could need to work it down just a touch. My .02
Welcome. Are you sure the "chatter" marks are from the ramp, and not the top front edge of the mag box? Could need to work it down just a touch. My .02
I see your point. Sorry I was no help.The tip of bullet hits the ramp and then turns sharply up to the chamber. It is still held in magazine by the rim of the case as the bullet goes over the lip of ramp then releases as the bolt moves forward.
The tip of bullet hits the ramp and then turns sharply up to the chamber. It is still held in magazine by the rim of the case as the bullet goes over the lip of ramp then releases as the bolt moves forward.
You can see the brass that's rubbed off on the feed ramp I believe their lies your problem
Time for a gunsmith or send to Bergara?You can see the brass that's rubbed off on the feed ramp I believe their lies your problem
Don't tell them you're shooting hand loads or your void your warranty if you still have a warranty you have to send it to Bergara if anyone else touches it you no longer have a warrantyTime for a gunsmith or send to Bergara?
Thanks for the tip. I got this gun new 4 months ago.Don't tell them you're shooting hand loads or your void your warranty if you still have a warranty you have to send it to Bergara if anyone else touches it you no longer have a warranty