Reply to thread

Message: <blockquote data-quote="SilverbulletMAG" data-source="post: 1550579" data-attributes="member: 108181">I use Hornady custom grade dies with my Weatherby (full length).  There are better options out there but these dies have worked well for me so far and it's "only" a hunting rifle after all... As others have mentioned, use the Hornady E420 and bump the shoulder .03"; at least that's what I've been going with to give some wiggle room so I don't run into issues in the field getting too tight on tolerances. I anneal the brass after every firing to get as much potential life out of it as possible, only trim when the brass is at max and needs it and would be disappointed if I didn't get at least 7 reloads ea. after pampering this brass.</blockquote>