Tikka T3 Magazine Modification Question

ibebirdman

New Member
Joined
Nov 27, 2008
Messages
3
I think about a Tikka T3 in 300WSM and doing the bolt modification to allow a longer bolt throw. But I don't want CDI DBM, which would allow a longer the use of AI magazines and a longer COAL, I want keep more compact, original factory plastic but still get a longer COAL.

So my questions is, has anyone successfully modified a 300wsm magazine to take advantage of longer COAL?

Alternatively, has anyone successfully modified the standard LA magazines (i.e for 30-06, 270, etc) to accept 300WSM?

Any descriptions, pictures or links to show how it is done would be appreciated.

Thanks for the help,

Joel
 
So I was at the gun shop today. I tried loading a 300WSM cartridge in a Tikka long action magazine. It went in, much to my surprise. I thought I had read on the internet that 300WSM cartridges would not fit in a long action magazine due to their slightly larger diameter. But it did. It was a bit rough getting a shell in an out. But it sure felt like some judicial work with a file would fix this and then it would feed fine.

Has anyone tried modifying a tikka long action magazine to successful feed a short magnum shell?

J
 
Warning! This thread is more than 11 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top